MX R38

Capacity
  • Front linkage category
  • 2
  • Lifting power at the ends of the lifting arms* (in kg)
  • 3800
  • Theoretical arm spacing between ball joints (in mm)
  • 825
Description
For a fully multipurpose, more cost-effective tractor! As well as the rear linkage, MX Front Linkages enable 2 implements to be attached to the tractor. With this combination, you can perform two operations in just one sweep! Results: maximum performance with less mechanical effort.

Advantages

SHARED COMPONENTS: A HIGHLY ECONOMICAL SOLUTION
The chassis, rear supports, control, hydraulic control valve and shock absorber are all common to MX loaders and front linkages. With the MX loader/MX front linkage combination, the loader bracket substitutes for the linkage chassis.
3 WORKING POSITIONS
- High and low positions: 100 mm gain - Floating position: allows ground contour to be followed (e.g. front mower)
PROTECTED PIVOT POINTS
Pins with accessible integral grease nipples. Bi-metal wear bushes for a longer service life.
MADE-TO-MEASURE FRAME
Each tractor model is studied, to ensure perfect integration of the loader and front linkage. Attachment is secured by using conical washers on the sides and face of the front casting.

Detailed specifications

MX R38
Front linkage category
2
Lifting power at the ends of the lifting arms* (in kg)
3800
Lifting power - centre of gravity 610 mm in front of the ball joints* (kg)
3300
Theoretical arm spacing between ball joints (in mm)
825
Height of lift arms from ground* in lowered position (in mm) (1)
< 200
Height of lift arms from ground* in high position (in mm) (2)
> 950
Hitching hands
auto. Cat 3 S
Heads
Cat 3 / 2 (D=64mm / d=28.4mm)
3rd point bar / length
Cat 2 / 460 à 680
Max power pdf (hp)
150
Output speed pdf (in rpm)
1000
Clockwise rotation (seen from the tractor seat)
Serie
Output shaft profile (din 9611) / Number of splines
1’ 3/8’’ - 6

Didn't find the product you were looking for?