MX R12
Capacity
- Front linkage category
- 1 à 2
- Lifting power at the ends of the lifting arms* (in kg)
- 1200
- Theoretical arm spacing between ball joints (in mm)
- 665 à 895
Description
For a fully multipurpose, more cost-effective tractor!
As well as the rear linkage, MX Front Linkages enable 2 implements to be attached to the tractor. With this combination, you can perform two operations in just one sweep! Results: maximum performance with less mechanical effort.
Advantages
SHARED COMPONENTS: A HIGHLY ECONOMICAL SOLUTION
The chassis, rear supports, control, hydraulic control valve and shock absorber are all common to MX loaders and front linkages. With the MX loader/MX front linkage combination, the loader bracket substitutes for the linkage chassis.
ARM WITH 3 POSITIONS:
- Fixed work position
- Floating work position: allows ground contour to be followed (e.g. front mower)
- Transport position
PROTECTED PIVOT POINTS
Pins with accessible integral grease nipples. Bi-metal wear bushes for a longer service life.
Compatible equipment and options
Detailed specifications
MX R12 | |
|---|---|
| General | |
| Front linkage category | 1 à 2 |
| Lifting power at the ends of the lifting arms* (in kg) | 1200 |
| Lifting power - centre of gravity 610 mm in front of the ball joints* (kg) | 950 |
| Theoretical arm spacing between ball joints (in mm) | 665 à 895 |
| Height of lift arms from ground* in lowered position (in mm) (1) | < 300 |
| Height of lift arms from ground* in high position (in mm) (2) | < 750 |
| 3rd point bar / length | Cat 2 / 460 à 680 |
| Max power pdf (hp) | 150 |
| Output speed pdf (in rpm) | 1000 |
| Clockwise rotation (seen from the tractor seat) | Serie |
| Output shaft profile (din 9611) / Number of splines | 1’ 3/8’’ - 6 |
| Compatibility options | |
| Hitching hands | auto. Cat1 et 2 |
| Heads | Cat. 2 |